J. For Propane Gas Installation (for all units).

WARNING

Fire Risk

Explosion Risk

Personal Injury Risk

An explosion could occur if a connection is made directly to an unregulated propane (LP) tank.

Pour vermiculite into each burner pan to the point where each pan is completely full. Level the vermiculite from right to left to ensure an even flame pattern. See Figure 6.

Note: Be sure to not cover the pilot assembly (located on the right side of the burner pan, installed in the vertical position) with vermiculite.

•Inspect the pilot burner to ensure it is clear of any rock wool.

•Remove the Platinum Bright Embers™ from the package. For optimum performance peel each piece apart in layers and lightly place on top of the vermiculite and rock wool where the flame is blue. This will achieve the desired realism.

•The gas burns at the point of the least resistance. In case of an uneven flame pattern it may be necessary to adjust the materials in the pans (using an object such as a screwdriver) to achieve the desired effect.

•Place desired amount of lava granules on the floor of the fireplace. DO NOT ALLOW THE GRANULES TO COME

IN CONTACT WITH THE FLAMES. (Lava granules may contain moisture which, when heating, may cause it to pop out during installation and set-up.) Ensure that the controls and switches are unobstructed after the granules are installed. DO NOT COVER THE AIR MIXER LOCATED ON THE LOWER LEFT SIDE OF THE BURNER.

•Place logs as shown in Sections S thru Z.

•Place accent logs around burner on floor of fireplace.

WARNING

Fire Risk

Explosion Risk

Personal Injury Risk

Pour vermiculite into each burner pan (LP) to the point where each pan is completely full. Failure to do so may cause the lighting to be delayed and this can be dangerous..

•Lightly place dime size pieces of rock wool evenly on top of the vermiculite to achieve a glowing ember effect. See Figure 7.

Note: For best results, do not pack down the rock wool. The placement of rock wool can have an effect on flame pattern and may need to be adjusted to achieve a desired appearance.

Note: The state of Massachusetts requires that the chimney flue damper, when used with gas logs, be welded open or completely removed. In the Commonwealth of Massachusetts this appliance must be installed by a licensed plumber or gasfitter.

K. Damper Stop Installation Instructions

Included in the burner assembly box is a damper stop clamp which attaches to the damper as shown (Figure 8). Install the clamp to the damper ensuring that the minimum require- ments (Tables 1 and 2) are achieved. Use a 7/16 in. wrench to secure the clamp to the damper. If the damper clamp pro- vided does not fit your application, other means of securing the proper opening must be provided by the installer.

Damper

Stop Clamp

Damper

Figure 8 Damper Stop Clamp

Hearth & Home Technologies • Grand Oak Gas Log Sets • 4004-299 Rev H • 05/08

Page 7 Page 9
Page 8
Image 8
Hearth and Home Technologies GO30SP-LP For Propane Gas Installation for all units, Damper Stop Installation Instructions
Page 7 Page 9

GO24SP-REM-NG, GO30SP-REM-NG, GO30SP-LP, GO24SP-NG, GO30-IPI-NG specifications

Hearth and Home Technologies has consistently pushed the envelope in the realm of fireplaces, and their exceptional range of gas fireplaces is no exception. Among their offerings, the GO24-IPI-LP, GO35SP-REM-NG, GO35-IPI-LP, GO24SP-LP, and GO30SP-NG models represent a compelling fusion of design, technology, and efficiency.

The GO24-IPI-LP, known for its flexibility in installation, showcases impressive contemporary aesthetics paired with a remarkable power venting system. This model stands out with its intuitive installation options, making it a favorite among homeowners looking for convenience without sacrificing warmth. The ambiance it creates is second to none, with customizable flame settings that allow users to adjust the intensity and visual appeal to suit their mood and space.

For those seeking advanced remote control features, the GO35SP-REM-NG is a prime choice. This model utilizes sophisticated electronics to enable users to operate the fireplace from anywhere in the room. The unit also boasts impressive heating capabilities, ensuring that spaces are kept warm and inviting during the cold months. Its sleek, modern design encompasses large viewing areas, providing an immersive fire experience while drawing attention to the dynamic flames housed within.

The GO35-IPI-LP model continues the trend with its efficiency and style. Featuring an innovative direct vent system, this gas fireplace can efficiently heat spaces while maintaining a clean aesthetic. Homeowners appreciate its ease of operation, paired with a "green" design that minimizes emissions. The model's ability to provide instant warmth while enhancing the home's décor makes it a popular option.

Meanwhile, the GO24SP-LP exemplifies versatility in installation and design. This model's compact size allows it to fit comfortably in various settings, while still delivering powerful heat. Its contemporary finish and clean lines make it an attractive focal point for any room.

Finally, the GO30SP-NG combines all the best aspects of its counterparts, offering an impressive balance between form and function. With an emphasis on efficiency, this model features advanced heating technology and a user-friendly interface that ensures comfort at the touch of a button.

In summary, Hearth and Home Technologies' range of gas fireplaces, including the GO24-IPI-LP, GO35SP-REM-NG, GO35-IPI-LP, GO24SP-LP, and GO30SP-NG, exemplifies modern craftsmanship and technology. Each model is designed to meet the needs of contemporary homeowners, providing warmth and beauty while focusing on energy efficiency and user convenience. Whether you're looking for a powerful heating solution or a stunning centerpiece for your living room, these models cater to varied preferences and styles.
Top Page Image Contents