Step 3. Installing the Vent System

A. Vent System Approvals

These models are approved to use D-series direct vent pipe components and terminations (see Figures 6 and 7). Ap- proved vent system components are labeled for identifica- tion. This pipe is tested and listed as an approved compo- nent of the fireplace. The pipe is tested to be run inside an enclosed wall. There is no requirement for inspection open- ings at each joint within the wall. There is no required pitch for horizontal vent runs. NO OTHER VENTING SYSTEMS OR COMPONENTS MAY BE USED.

Detailed installation instructions are included with each vent termination kit and should be used in conjunction with this Installers Guide.

The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used.

VERTICAL

TERMINATION

HORIZONTAL

TERMINATION

WALL FIRESTOP

Identifying Vent Components

The vent systems installed on this gas fireplace may in- clude one, two, or three 90° elbow assemblies. The rela- tionships of vertical rise to horizontal run in vent configura- tions using 90° elbows MUST BE strictly adhered to. The rise to run relationships are shown in the venting drawings and tables. Refer to the diagrams on the next several pages.

NOTE: Two 45° elbows may be used in place of one 90° elbow. Rise to run ratios in the vent system must be followed if 45° elbows are used.

This model has vent starting collars on both the top and the back of the unit. Depending upon the installation, decide which ONE set of starting collars will be used to attach the vent system. The starting collar sealing cap must remain on the starting collars NOT used.

STORM COLLAR

ROOF FLASHING

HORIZONTAL PIPE

SUPPORT

PIPE LENGTH

Termination kits

 

CEILING

WALL BRACKET

90 DEGREE

FIRESTOP

 

ELBOW

DVK-01DDVK-TVCD

DVK-01TRD

PVK-80

DVK-SNKD

u Figure 7. Vent System Components and Termination Kits

20

Page 19 Page 21
Page 20
Image 20
Hearth and Home Technologies R-CORNER-TRC Installing the Vent System, Identifying Vent Components, Vent System Approvals
Page 19 Page 21

L-CORNER-TRC, R-CORNER-TRC, ST-TRC, PIER-TRC specifications

Hearth and Home Technologies offers an impressive range of fireplace products that blend aesthetics with advanced technology. Among their innovative lineup, the PIER-TRC, ST-TRC, R-CORNER-TRC, and L-CORNER-TRC models stand out as versatile and stylish options for modern homes. Each of these fireplace units is designed to enhance the ambiance of a space while providing reliable performance.

The PIER-TRC model is ideal for those seeking a focal point in a living room or gathering space. This pier-style fireplace is characterized by its striking, contemporary design and clean lines. It allows for a three-sided view of the flames, creating a captivating visual experience from various angles. The PIER-TRC incorporates advanced venting technology, ensuring efficient heat distribution without compromising on aesthetics. Homeowners can choose from a selection of decorative media options to personalize the appearance, adding a unique touch to any interior.

Next, the ST-TRC model is a sleek, modern fireplace that excels in providing both form and function. Its space-saving design makes it a perfect choice for smaller rooms while still delivering ample heat output. The ST-TRC features a linear, minimalist look that fits seamlessly with contemporary decor. Advanced electronic ignition systems enable effortless operation, while the option for smart home integration allows users to control the fireplace with ease using mobile devices.

For those looking to create a cozy corner in their living space, both the R-CORNER-TRC and L-CORNER-TRC models offer an excellent solution. Designed specifically for corner placements, these fireplaces feature a unique design that allows for a two-sided viewing experience. The R-CORNER-TRC wraps around the right side, while the L-CORNER-TRC offers a similar aesthetic for the left. Both models utilize cutting-edge technology to ensure efficient heating and combustion, with adjustable flame settings that let users customize their experience.

All of these models come equipped with high-efficiency burners, maximizing heat output while minimizing fuel consumption. Hearth and Home Technologies ensure that each unit meets stringent safety and performance standards. With a commitment to quality and innovation, they provide homeowners with stylish and functional solutions that enhance the warmth and comfort of their living spaces.

In conclusion, the PIER-TRC, ST-TRC, R-CORNER-TRC, and L-CORNER-TRC fireplaces from Hearth and Home Technologies provide a perfect balance of elegance, efficiency, and versatility. Each model showcases advanced technologies and design features that cater to modern needs, making them an excellent choice for any home.
Top Page Image Contents