Maintaining and Servicing Your Fireplace

Fireplace Maintenance

Although the frequency of your fireplace servicing and main- tenance will depend on use and the type of installation, you should have a qualified service technician perform an appli- ance check-up at the beginning of each heating season. See the table below for specific guidelines regarding each fireplace maintenance task.

IMPORTANT: TURN OFF THE GAS BEFORE SERVICING YOUR FIREPLACE.

Replacing old ember material

Frequency: Once annually, during the checkup.

By: Qualified service technician.

Task: Brush away loose ember material near the burner. Replace old ember material with new dime-size and shape pieces of Golden Ember (GE-93) and Glowing Ember (050- 721). New ember material should be placed alternately on top of the burner - a layer of Golden Ember, a layer of Glowing Ember, and so on. Save the remaining ember material and repeat this procedure at your next servicing. For more information, see Placing Ember Material.

Cleaning Burner and Controls Frequency: Once annually. By: Qualified service technician.

Task: Brush or vacuum the control compartment, fireplace logs and burner areas surrounding the logs.

uCleaning Flame Sensor Rod (IPI Systems) Frequency: Periodically.

By: Qualified service technician.

Task: Make a visual check of the straight flame sensor rod. Use steel wool or fine sandpaper to carefully remove any existing white deposits.

Checking Flame Patterns, Flame Height Frequency: Periodically.

By: Qualified service technician/Home owner.

Task: Make a visual check of your fireplace’s flame patterns. Make sure the flames are steady - not lifting or floating.

uSee Figure 38. The flame sensor (IPI) or thermopile/ thermocouple (standing pilot) tips should be covered with flame. See Figure 30.

MAKE SURE THE FLAMES

ARE STEADY—NOT

LIFTING OR FLOATING.

Figure 38. Burner Flame Patterns

Checking Vent System

Frequency: Before initial use and at least annually thereafter, more frequently if possible.

By: Qualified service technician/Home owner.

Task: Inspect the external vent cap on a regular basis to ensure that no debris is interfering with the flow of air. Inspect entire vent system for proper function.

Cleaning Glass Door

Frequency: After the first 3 to 4 hours of use. As neces- sary after initial cleaning.

By: Home owner.

Task: Remove and clean glass after the first 3 to 4 hours of use. After the initial cleaning, clean as necessary, particu- larly after adding new ember (flame colorant) material. Film deposits on the inside of the glass door should be cleaned off using a household glass cleaner. NOTE: DO NOT handle or attempt to clean the door when it is hot and DO NOT use abrasive cleaners.

40

Page 39
Page 40
Image 40
Hearth and Home Technologies R-CORNER-TRC, ST-TRC Fireplace Maintenance, Replacing old ember material, Cleaning Glass Door
Page 39

L-CORNER-TRC, R-CORNER-TRC, ST-TRC, PIER-TRC specifications

Hearth and Home Technologies offers an impressive range of fireplace products that blend aesthetics with advanced technology. Among their innovative lineup, the PIER-TRC, ST-TRC, R-CORNER-TRC, and L-CORNER-TRC models stand out as versatile and stylish options for modern homes. Each of these fireplace units is designed to enhance the ambiance of a space while providing reliable performance.

The PIER-TRC model is ideal for those seeking a focal point in a living room or gathering space. This pier-style fireplace is characterized by its striking, contemporary design and clean lines. It allows for a three-sided view of the flames, creating a captivating visual experience from various angles. The PIER-TRC incorporates advanced venting technology, ensuring efficient heat distribution without compromising on aesthetics. Homeowners can choose from a selection of decorative media options to personalize the appearance, adding a unique touch to any interior.

Next, the ST-TRC model is a sleek, modern fireplace that excels in providing both form and function. Its space-saving design makes it a perfect choice for smaller rooms while still delivering ample heat output. The ST-TRC features a linear, minimalist look that fits seamlessly with contemporary decor. Advanced electronic ignition systems enable effortless operation, while the option for smart home integration allows users to control the fireplace with ease using mobile devices.

For those looking to create a cozy corner in their living space, both the R-CORNER-TRC and L-CORNER-TRC models offer an excellent solution. Designed specifically for corner placements, these fireplaces feature a unique design that allows for a two-sided viewing experience. The R-CORNER-TRC wraps around the right side, while the L-CORNER-TRC offers a similar aesthetic for the left. Both models utilize cutting-edge technology to ensure efficient heating and combustion, with adjustable flame settings that let users customize their experience.

All of these models come equipped with high-efficiency burners, maximizing heat output while minimizing fuel consumption. Hearth and Home Technologies ensure that each unit meets stringent safety and performance standards. With a commitment to quality and innovation, they provide homeowners with stylish and functional solutions that enhance the warmth and comfort of their living spaces.

In conclusion, the PIER-TRC, ST-TRC, R-CORNER-TRC, and L-CORNER-TRC fireplaces from Hearth and Home Technologies provide a perfect balance of elegance, efficiency, and versatility. Each model showcases advanced technologies and design features that cater to modern needs, making them an excellent choice for any home.
Top Page Image Contents