Hearth and Home Technologies RSW-41, RSW-47 C. SYSTEM COMPONENTS

08/04 26023 Rev L 5

RSW-41 AND RSW-47 SERIES INSTALLATION INSTRUCTIONS

C. SYSTEM COMPONENTS

1. Fireplace Components

GLASS DOORS

INTEGRAL GRATE

(supplied)

GR25/GR26

FAN KIT

DM1036/DM1042

Bifold Glass Doors

JUNCTION BOX

JK8

DMA1036/DMA1042

Arched Cabinet Style Glass Doors

HEARTH EXTENSION

BC10

Fan Speed Control

FK18

CAT. # A B

HX3 52 in. 16 in.

HX4 66 in. 20 in.

Catalog # Description:

RSW-41 RSW-47 Fireplace, includes integral grate and hearth protection strips.

HX3 HX4 Hearth Extension

DM1036 DM1042 Original Bifold Glass Doors - Black Finish

DM1036B DM1042B Original Bifold Glass Doors - Polished Brass Finish

DM1036S DM1042S Original Bifold Glass Doors - Stainless Steel Finish

DMA1036B DMA1042B Arched Cabinet Style Glass Doors - Polished Brass Finish

GR25 GR26 Integral Grate (included with fireplace)

BC10 Fan Speed Control

FK18 F an Kit with JK8 Junctio n Box

JK8* Junction Box Kit

AK14 Outside Air Kit

*The JK8 junction box must be installed at the time of initial fireplace installation or considerable

reconstruction may be required.

Contents

Main TABLE OF CONTENTS Safety Precautions DESIGN AND INSTALLATION CONSIDERATIONS RSW-41 AND RSW-47 SERIES INSTALLATION INSTRUCTIONS B. DESCRIPTION OF THE FIREPLACE SYSTEM Note: A. LISTINGS AND CODE APPROVALS Heat-N-Glo is a registered trademark of Hearth & Home Technologies Inc. C. SYSTEM COMPONENTS 1. Fireplace Components FAN KIT GLASS DOORS INTEGRAL GRATE Page RSW-41 AND RSW-47 SERIES INSTALLATION INSTRUCTIONS 2. Chimney Components Catalog # Description: Page Page 1. Fireplace Locations and Space Requirements D. PRE-INSTALLATION PREPARATION 2. Frame the Fireplace 3. Sidewalls/Surrounds E. CHIMNEY REQUIREMENTS 1. Using Offsets and Returns Table 1 Offset Chart* Table 2 3. Number of Sections Required 2. Chimney Height Requirements (above roof line) HEIGHT OF CHIMNEY COMPONENTS F. INSTALLATION OF FIREPLACE Important: 1. Position the Fireplace 2. Place the Protective Metal Hearth Strips 3. Level the Fireplace 4. Assemble Chimney Sections 5. Install Firestop Spacers Note: 7. Double-check the Chimney Assembly 8. Secure the Chimney System WARNING! RISK OF FIRE. 6. Attic Insulation Shield 9. Mark the Exit Point of the Roof 10.Cut out the Hole in the Roof 11.Assemble the Chimney Sections Through the Roof 12.Install the Roof Flashing 14.Install the Chimney Air Kit (Required in Canada) 15.Complete the Enclosure 16.Gas Log/Lighter Provisions 17.Hearth Extension 18.Position the Hearth Extension 19.Finishing Material 20.Mantel 21.Glass Doors G. CONSTRUCTING A CHASE 1. Materials 2. Chase Top 3. Termination Cap Page Note: Save and pass this instruction manual to subsequent home owners. The information H. OPERATING INSTRUCTIONS 1. General Information 2. Outside Air 3. Flue Damper 4. Glass Doors 5. Grate 6. Firescreen 7. Wood Fuel Note: 8. Starting a Fire 9. Draft Problems Page I. MAINTENANCE INSTRUCTIONS 2. Creosote and Soot 3. Chimney Cleaning 4. Clear Space Near the Fireplace 1. Disposal of Ashes Page INDEX A B C D WARRANTY FOR HEAT-N-GLO FIREPLACES