2 OPERATING INSTRUCTIONS

Ensure the appliance is connected to a properly grounded electrical outlet. If a new outlet is required, it should be installed by a qualified electrician according to applicable building codes.

A. Remote Control

Note: If the appliance does not respond to the hand held control see “Remote Control Initialization” below.

This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates and uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Re-orient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

LEARN BUTTON

FLAMES

EMBERS

B. Remote Control Initialization

This procedure is required only when the unit is installed or the transmitter is replaced and is not affected by the loss of power.

•Ensure that power is supplied through main service panel.

•Place fresh batteries in the transmitter.

•Access the LEARN button by removing the front screen.

•Press and hold down the learn button. You will hear a beep.

•Press a button on the hand-held transmitter.

•Release the learn button when you hear the long beep.

•This completes the remote control receiver/transmitter initialization.

•Three transmitters can be used simultaneously.

C. Control Usage

The controls operates the appliance modes.

•The flame effect and backlog/embers are turned ON/OFF by alternate action of the FLAME button on the remote transmitter.

•The front embers and motion are turned ON/OFF by alternate action of the EMBERS button on the remote transmitter.

•The optional wall FLAME switch provides manual operation (ON/OFF) of the flame effect.

•The optional wall EMBERS switch controls the front embers and motion.

The optional wall switche is in parallel with the remote control relays. The wall switche MUST be OFF for the Remote Transmitter to control the appliance.

6

Hearth & Home Technologies Inc. • SFE-ST • 4050-510 Rev A • 05/08

Page 5 Page 7
Page 6
Image 6
Hearth and Home Technologies SFE-ST manual Operating Instructions, Remote Control Initialization, Control Usage
Page 5 Page 7

SFE-ST specifications

Hearth and Home Technologies SFE-ST is a cutting-edge fireplace solution, designed for homeowners seeking a blend of aesthetics and functionality. With a focus on innovation, this model delivers an exceptional experience in both form and performance, making it a popular choice among modern homeowners.

One of the standout features of the SFE-ST is its stunning design. The sleek, minimalistic exterior allows it to fit seamlessly into various interior styles, from contemporary to traditional. This versatility ensures that it serves as a beautiful centerpiece in any room, enhancing the overall decor while providing warmth and comfort.

The SFE-ST is engineered with advanced technology to maximize efficiency and reduce environmental impact. It incorporates a state-of-the-art combustion system that allows for clean burning, resulting in lower emissions compared to traditional fireplaces. This eco-friendly focus not only benefits the environment but also aligns with the growing consumer demand for sustainable appliances.

Another defining characteristic of the SFE-ST is its ease of use. Equipped with an intuitive control system, users can effortlessly adjust the flame height, heat output, and even set timers for automatic operation. This user-friendly interface makes it accessible to all, regardless of technical skill level.

Safety features are paramount in the design of the SFE-ST. The model includes safety switches that automatically shut off the system if it detects any anomalies, such as overheating or blockage. This commitment to safety ensures peace of mind for homeowners, especially those with children or pets.

Additionally, the SFE-ST utilizes innovative heat distribution technology. Its efficient heat exchanger circulates warm air throughout the room, providing consistent and even heating. This feature not only enhances comfort but also improves energy efficiency, allowing users to save on heating costs during the colder months.

Finally, the SFE-ST is compatible with various fuel options, including natural gas, propane, and electric, providing flexibility based on user preference and availability. This versatility allows homeowners to select the fuel type that best suits their lifestyle and energy needs.

In summary, Hearth and Home Technologies SFE-ST represents the perfect fusion of style, efficiency, and safety. With its advanced technology, user-friendly interface, and sleek design, it stands out as a premier choice for anyone looking to enhance their living space with a modern fireplace solution. Whether for warmth, ambiance, or aesthetic appeal, the SFE-ST delivers on all fronts.
Top Page Image Contents