Hearth and Home Technologies SFE-ST Important Instructions, Unpacking, Clearance to Combustibles

Models: SFE-ST

1 8
Download 8 pages 50.82 Kb
Page 3
Image 3

1 Important Instructions

WARNING! Risk of Fire!

DO NOT:

install or operate damaged appliance

modify appliance

operate the appliance without fully assembling all components

The following actions are strictly prohibited:

Installation other than as instructed by Hearth & Home Technologies Inc.

Installation and/or use of any component part not approved by Hearth & Home Technologies Inc.

Hearth & Home Technologies Inc. disclaims any responsibility for, and the warranty and agency listing will be voided by the above actions.

WARNING! Improper installation, adjustment, altera- tion, service or maintenance can cause injury or prop- erty damage. Refer to the owner’s information manual provided with this appliance. For assistance or additional information consult a qualified installer, service agency or your dealer.

NOTICE! This appliance is not intended for use as a primary heat source and should not be factored as such in residential heating calculations.

WARNING! Risk of Electric Shock! This product should never be installed near water.

WARNING! DO NOT use this appliance if any part has been under water. Immediately call a qualified service technician to inspect and to replace any part of the electrical system if necessary

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

This appliance is intended for use in bathrooms, laundry areas and similar indoor locations. Never locate appliance where it may fall into a bathtub or other water container.

Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

Always use ground fault protection where required by electrical code.

Always disconnect power before performing any cleaning, maintenance.

To prevend a possible fire, do not burn wood or other materials in this appliance.

To prevent electric shock or fire, always use a qualified electrician should new circuits or outlets be required.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

A. Unpacking

Remove the carton and retain the remote transmitter and installation document located in the top foam.

The retaining brackets holding the front doors must be removed.

Retaining Brackets

Remove Retaining Brackets Holding Front Doors

B. Locating Your Electric Appliance

Your new electric appliance may be installed virtually anywhere in your home. However, when choosing a location ensure that the general instructions are followed. For best results, install out of direct sunlight.

Power supply service must be either completed or placed within the appliance prior to finishing to avoid reconstruction.

C. Clearance to Combustibles

Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 in. (0 mm) Floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 in. (0 mm) Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 in. (0 mm) Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 in. (0 mm)

3

Hearth & Home Technologies Inc. • SFE-ST4050-510 Rev A • 05/08

Page 3
Image 3
Hearth and Home Technologies SFE-ST manual Important Instructions, Unpacking, Locating Your Electric Appliance

SFE-ST specifications

Hearth and Home Technologies SFE-ST is a cutting-edge fireplace solution, designed for homeowners seeking a blend of aesthetics and functionality. With a focus on innovation, this model delivers an exceptional experience in both form and performance, making it a popular choice among modern homeowners.

One of the standout features of the SFE-ST is its stunning design. The sleek, minimalistic exterior allows it to fit seamlessly into various interior styles, from contemporary to traditional. This versatility ensures that it serves as a beautiful centerpiece in any room, enhancing the overall decor while providing warmth and comfort.

The SFE-ST is engineered with advanced technology to maximize efficiency and reduce environmental impact. It incorporates a state-of-the-art combustion system that allows for clean burning, resulting in lower emissions compared to traditional fireplaces. This eco-friendly focus not only benefits the environment but also aligns with the growing consumer demand for sustainable appliances.

Another defining characteristic of the SFE-ST is its ease of use. Equipped with an intuitive control system, users can effortlessly adjust the flame height, heat output, and even set timers for automatic operation. This user-friendly interface makes it accessible to all, regardless of technical skill level.

Safety features are paramount in the design of the SFE-ST. The model includes safety switches that automatically shut off the system if it detects any anomalies, such as overheating or blockage. This commitment to safety ensures peace of mind for homeowners, especially those with children or pets.

Additionally, the SFE-ST utilizes innovative heat distribution technology. Its efficient heat exchanger circulates warm air throughout the room, providing consistent and even heating. This feature not only enhances comfort but also improves energy efficiency, allowing users to save on heating costs during the colder months.

Finally, the SFE-ST is compatible with various fuel options, including natural gas, propane, and electric, providing flexibility based on user preference and availability. This versatility allows homeowners to select the fuel type that best suits their lifestyle and energy needs.

In summary, Hearth and Home Technologies SFE-ST represents the perfect fusion of style, efficiency, and safety. With its advanced technology, user-friendly interface, and sleek design, it stands out as a premier choice for anyone looking to enhance their living space with a modern fireplace solution. Whether for warmth, ambiance, or aesthetic appeal, the SFE-ST delivers on all fronts.