Hearth and Home Technologies SFE-ST manual Framing, Hardwire Electrical Connections

Models: SFE-ST

1 8
Download 8 pages 50.82 Kb
Page 4
Image 4

D. Framing

Choose an appliance location and frame as shown below.

It is important to allow for finished face when setting the depth of the frame.

The appliance can now be positioned in the opening.

Level it with shims if necessary, and attach the unit to the frame using the nailing flanges provided.

B

C

A

 

A

B

C

 

Rough Opening

Rough Opening

Rough Opening

 

Width

Height

Depth

in.

30 1/2

26 1/4

17

mm

775

667

432

SFE-ST Framing Dimensions

17 in.

(432 mm)30.3 in.

(770 mm)

.5 in.

(13 mm)

26 in.

(660 mm)

18 in.

(457 mm)

SFE-ST Appliance Dimensions

E. Hardwire Electrical Connections

WARNING! Electrical wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury.

Note: All wiring must be completed prior to finishing the unit.

For supply connections use No. 14 AWG or larger wires. Use copper wire only. Connect only to a 15 AMP branch circuit.

Remove the screws securing the junction block cover.

Wire to a properly grounded, 120 volt, 60 Hz, 15 AMP circuit

Ensure all junction block connections are tight.

Replace the cover and retaining screws.

All components and wiring may be inspected by removing the top inter-panel through the appliance front opening.

F. Electrical Specifications

Voltage . . . . . . . . . . . . . . . . . . . . . . 120 V AC, 60 Hz

Total Amps . . . . . . . . . . . . . . . . . . . . . . . . 0.15 AMP

Total Watts . . . . . . . . . . . . . . . . . . . . . . . . . 18 Watts

G. Wall Switch Connections

WARNING! Do NOT connect the optional low voltage switch to 120 volt branch circuit.

The optional WSK-21 Wall Switch contains a single pole low voltage switch.

Maximum run distance is 30 ft. (9.14 m) with 20 gauge solid copper low voltage thermostat wire. Connect the leads from the switch to the #2 and #3 terminals on the terminal block located under a cover on the lower side of the inner top.

The door must be removed to access the terminal block.

4

Hearth & Home Technologies Inc. • SFE-ST4050-510 Rev A • 05/08

Page 4
Image 4
Hearth and Home Technologies SFE-ST manual Framing, Hardwire Electrical Connections, Electrical Specifications

SFE-ST specifications

Hearth and Home Technologies SFE-ST is a cutting-edge fireplace solution, designed for homeowners seeking a blend of aesthetics and functionality. With a focus on innovation, this model delivers an exceptional experience in both form and performance, making it a popular choice among modern homeowners.

One of the standout features of the SFE-ST is its stunning design. The sleek, minimalistic exterior allows it to fit seamlessly into various interior styles, from contemporary to traditional. This versatility ensures that it serves as a beautiful centerpiece in any room, enhancing the overall decor while providing warmth and comfort.

The SFE-ST is engineered with advanced technology to maximize efficiency and reduce environmental impact. It incorporates a state-of-the-art combustion system that allows for clean burning, resulting in lower emissions compared to traditional fireplaces. This eco-friendly focus not only benefits the environment but also aligns with the growing consumer demand for sustainable appliances.

Another defining characteristic of the SFE-ST is its ease of use. Equipped with an intuitive control system, users can effortlessly adjust the flame height, heat output, and even set timers for automatic operation. This user-friendly interface makes it accessible to all, regardless of technical skill level.

Safety features are paramount in the design of the SFE-ST. The model includes safety switches that automatically shut off the system if it detects any anomalies, such as overheating or blockage. This commitment to safety ensures peace of mind for homeowners, especially those with children or pets.

Additionally, the SFE-ST utilizes innovative heat distribution technology. Its efficient heat exchanger circulates warm air throughout the room, providing consistent and even heating. This feature not only enhances comfort but also improves energy efficiency, allowing users to save on heating costs during the colder months.

Finally, the SFE-ST is compatible with various fuel options, including natural gas, propane, and electric, providing flexibility based on user preference and availability. This versatility allows homeowners to select the fuel type that best suits their lifestyle and energy needs.

In summary, Hearth and Home Technologies SFE-ST represents the perfect fusion of style, efficiency, and safety. With its advanced technology, user-friendly interface, and sleek design, it stands out as a premier choice for anyone looking to enhance their living space with a modern fireplace solution. Whether for warmth, ambiance, or aesthetic appeal, the SFE-ST delivers on all fronts.