28
Surface Burners
Top burners require little care other than to wipe off the head of each burner. If a boilover
occurs, the burner cap can be easily lifted out so burner port holes can be cleaned in hot soapy
water with a soft brush. There are no bolts or screws to remove. The igniter must also be kept
clean to ensure quick positive starts. Simply lift the burner cap and clean. When replacing,
be sure the tab is locked securely in position on the burner base. For normal or everyday
cleaning of light spills, wipe the burner caps with a damp cloth. For heavy duty cleaning—
cooked spills, oil stains, etc. scrub with a tub and tile type of cleaner. Rinse thoroughly after
every cleaning operation. Wipe away excess water . Avoid using abrasives on the burner
base, as they may damage the finish on the burner base.
Oven and Cabinet Light Replacement
Before replacing lamp, disconnect the power at the main fuse or circuit breaker panel. When
replacing light bulbs wait until the oven and bulb are cool. Remove oven light lens by simply
unscrewing it counter clockwise. The bulb can then be unscrewed easily. Always handle the
bulb with a dry (never wet) cloth to protect hands. If light bulb should break, disconnect power
to range by unplugging it or removing the fuse from the panel before touching the bulb.
Replace the bulb. Use only a 40 watt oven bulb available at your local hardware store or
appliance dealer.
When cleaning the oven, do not touch lens with a wet cloth.
WARNING!Do not sit, lean, lift or stand on the
doors or drawers of this range as
possible injuries may result.
burner base
cap
flame spreader