Heartland 9200, 6210, 1903, 1902, 2602, 2603, 8200, 620, 8210, 7200 Connecting Power to the Cabinet

CONNECTING POWER TO THE CABINET

COMBINATION AND ELECTRIC SELF CLEAN OR STANDARD STOVES ONLY

(SEE NEXT PAGE FOR GAS STOVES)

After your exhaust hood has been installed the very last thing to do is to connect the multipin plug to the range. The receptacle is located at the rear of the stove by the main power cord.

5200, 5210,			4200, 4210,
6200, 6210,	Back of	Back of	8200, 8210,
	stove	stove

Exhaust Hood Recptacle Locations

When installing the multi-pin plugs, make sure the flat sided pins are aligned with flat sided holes. Each plug is coded for proper fit. Do not force plug into receptacle.

Insert themulti-pin plugs into correspond- ing receptacles- each plug is coded to match its receptacle.

Loop power cord on back and attach power cord to stove back with supplied cable tie and screw

Plug the stove into wall receptacle. Check all electrical functions of the cabinet (fan,light, clock, etc.) and check againthat ALL screws have been tight- ened before completeing the installa- tion.

8