| | Bracket | |
| | Gasket - Peel off backing | |
| | and stick on. | |
Steel Washer | Sheet metaI | Machine screw | Gasket |
| screw (black) | (Nickel Plated) |
-Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during installation.
-Place box on the floor close to stove. (See Fig. 1 Page 2).
-With a helper,lift cabinet assembly from box by area that is circled.(See Fig.1 Page 2).
-Rest the cabinet assembly on the carton,while your helper steadies the cabinet,peel the cabinet backing off the gasket and stick one on each bracket.
-Place cabinet assembly onto stove body.(See diagram above)
Caution: In the case of the Glass cooktop models 8200, 8210, 6200, 6210:
DO NOT REST CLOSET CORNER BRACKETS ON GLASS, to prevent damage to glass top
-Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the cabinet, fasten the cabinet brackets to the stove top with machine screws .
-To fasten the splashback to the rear of stove, with the Models 5200, 5210, 6200, 6210 use 5 sheet metal screws and washers. For Models 4200, 4210, 8200, 8210 use 4 sheet metal screws and washers. To prevent chipping do not overtighten or use power tools.
STOVE 
TOP