GAS STOVES ONLY
(WOOD STOVES SEE NEXT PAGE)
Sheet metal screw
Steel washer
48" models only-right brackel front screw attachment:machine screw attached to stove top without use of nut.
| | | Bracket | |
| | | Gasket - Peel off backing | |
| | | and stick on. | |
Nut | | | | |
Steel Washer | Sheet metaI | Nut | Machine screw | Gasket |
| screw (black) | | (Nickel Plated) |
-Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during installation.
-Place box on the floor close to stove. (See Fig. 1 Page 2).
-With a helper,lift cabinet assembly from box by area that is circled.(See Fig.1 Page 2).
-Rest the cabinet assembly on the carton,while your helper steadies the cabinet,peel the cabinet backing off the gasket and stick one on each bracket.
-Place cabinet assembly onto stove body.(See diagram above)
-Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the cabinet, fasten the cabinet brackets to the stove top with machine screws and nuts.
-To fasten the splashback to the rear of stove, with the Model 7200 use 5 sheet metal screws and washers. For Model 9200 use 4 sheet metal screws and washers. To prevent chipping do not overtighten or use power tools.
STOVE 
TOP