Heat & Glo LifeStyle Cosmo-130 owner manual C. Optional Accessories Requirements

C. Optional Accessories Requirements

•This appliance may be used with a wall switch, wall mounted thermostat and/or a remote control.

•To connect optional accessories, the supplied cord as- sembly should be used. See attached Figure 10.2 for a wiring diagram for a blower or remote.

Wiring for optional Hearth & Home Technologies approved accessories should be done now to avoid reconstruction. Follow instructions that come with those accessories.

•Plug the cord into a convenient outlet.

•Must use cord supplied.

•An IntelliFire Plus™ Wireless Controls or WSK-21 wired wall switch may be used with the IntelliFire Plus™ Ignition System. Hearth & Home Technologies recommends that IntelliFire Plus™ wireless controls be used for their features and functionality with the Intel- liFire Plus™ ignition system.

•A standard ON/OFF switch is compatible.

WARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

WARNING! Risk of Shock! Replace damaged wire with type 105° C rated wire. Wire must have high temperature insulation.

NOTE: IF ANY OF THE ORIGINAL	BLOWER	PLUG
WIRE AS SUPPLIED WITH THE
		120V EXISTING
APPLIANCE MUST BE REPLACED,		OUTLET
IT MUST BE REPLACED WITH TYPE
1050 C RATED WIRE.

NOTE: USE ZIP TIES TO RESTRAIN			JUMPER WIRE
THE LOOSE WIRES UNDERNEATH
THE APPLIANCE AND KEEP THEM
AWAY FROM THE BLOWER WHEEL		TEMPERATURE
(FAN BLADES).
		SENSOR SWITCH
		TO VALVE
	WHT (2)	ORG
		BLK
	GRN (2)
	BLK (2)
BLK (2)		GRN	SPEED CONTROL
			(RHEOSTAT)
GRN (2)
BLK (2)	BRN		TO VALVE BRACKET
	BLK		(GROUND)
	RED
PLUG INTO 120V
EXISTING OUTLET

VARIABLE SPEED

CONTROL

BLK

BLK BLK

BLK

TEMPERATURE

SENSOR SWITCH

DC REGULATOR

RECEPTACLE

BLOWER

RECEPTACLE

WHT BLK GRN GRN

BLK BLK

BLK BLK

GRN GRN

WHT BLK

BLOWERS

Figure 10.2 Fan Wiring Diagram

26 Heat & Glo • Cosmo-I30, Cosmo-I35 • 2239-900 Rev. H • 1/11