Heat & Glo LifeStyle Cosmo-130 Appliance Setup, A. Remove Glass Assembly, C. Clean the Appliance

12 Appliance Setup

A. Remove Glass Assembly

See Section 12.F.

B. Remove the Shipping Materials

Remove shipping materials from inside or underneath the fi rebox.

C. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the control cavity.

D. Accessories

Install approved accessories per instructions included with accessories. Contact your dealer for a list of ap- proved accessories.

WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazard and will void the warranty.

E. Glass Panel Instructions

1.Install back glass panel (see Figure 12.1). Bend retain- ing tab down to hold back glass panel in position (see Figure 11.2).

2.Install left glass panel (see Figure 12.1). Install retain- ing bracket with the self-drilling screw provided to hold the left glass panel in position (see Figure 12.2).

3.Install right glass panel (see Figure 12.1). Install re- taining bracket with the self-drilling screw provided to hold the right glass panel in position (see Figure 12.2).

RETAINING

BRACKET

SELF-DRILLING

SCREW

GLASS

PANEL

RETAINING TAB

Figure 12.2 Bend Retaining Tab Down

	SMOOTH SURFACE MUST FACE OUT
B	A	C
Figure 12.1 Placement of Glass Panels

Heat & Glo • Cosmo-I30, Cosmo-I35 • 2239-900 Rev. H • 1/11 29