Heat & Glo LifeStyle DAKOTA-AU manual Framing and Clearances, A. Select Fireplace Location

3 Framing and Clearances

Note:

•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.

•Illustrations/diagrams are not drawn to scale.

•Actual installation may vary due to individual design preference.

WARNING

Fire Risk

Provide adequate clearance:

•Around air openings.

•To combustibles.

•For service access.

Locate fireplace away from traffic areas.

A. Select Fireplace Location

When selecting a location for your fireplace it is important to consider the required clearances to walls (See Figure 3.1).

Note: For actual fireplace dimensions refer to Section 12.

1.47 M

E

D

Note: If this surface is inside the building’s warm air envelope...

E

A

D

...then this surface must be an exterior wall system.

D

B

C

B2.08 M

C

A	B	C	D	E
629 mm	1.22 m	1.25 m	13 mm	38 mm

Figure 3.1 Fireplace Locations

This appliance shall be used in an above ground open-air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convection.

Heat & Glo Lifestyle Collection • Dakota-AU• 4036-914 Rev B • 06/07 5