8 Gas Information

A. Fuel Conversions

C. Gas Connection

Before making gas connections ensure that appliance be- ing installed is compatible with the available gas type.

Any natural or propane gas conversions necessary to meet the appliance and locality needs must be made by a qualified technician using Hearth & Home Technologies specified and approved parts.

Note: Have the gas supply line installed in accordance with local building codes, if any. If not, follow ANSI

223.1.Installation should be done by a qualified installer approved and/or licensed as required by the locality. (In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter).

B. Gas Pressures

Proper input pressures are required for optimum appli- ance performance. Gas line sizing requirements need to be made following NFPA51.

WARNING

Fire Risk. Explosion Hazard.

High pressure will damage valve.

• Disconnect gas supply piping BEFORE pressure testing gas line at test pressures above 1/2 psig.

Close the manual shutoff valve BEFORE pressure testing gas line at test pressures equal to or less than 1/2 psig.

WARNING

Verify inlet pressures.

• High pressure may cause overfire condition.

• Low pressure may cause explosion.

Verify minimum pressures when other household gas appliances are operating.

Install regulator upstream of valve if line pressure is greater than 1/2 psig.

Pressure requirements for appliance are shown in the table below. Minimum pressures must be met when other household gas appliances are operating.

Pressure

Natural Gas

Propane

Minimum inlet pressure

5.0 inches

11.0 inches

w.c.

w.c.

 

Maximum inlet gas pressure

14.0 inches

14.0 inches

w.c.

w.c.

 

Manifold pressure

3.5 inches

10.0 inches

w.c.

w.c.

 

NOTE: A listed (and Commonwealth of Massachusetts ap- proved) 1/2 inch (13 mm) T-handle manual shut-off valve and flexible gas connector are connected to the 1/2 inch (13 mm) control valve inlet.

If substituting for these components, please consult local codes for compliance.

Refer to Reference Section 16 for location of gas line access in appliance.

NOTE: Gas line may be run from either side of the appliance provided the hole in the outer wrap does NOT exceed 2-1/2 inches in diameter and does not penetrate the firebox.

WARNING

Gas Leak Risk

Support control when attaching pipe to prevent bending gas line.

NOTE: The gap between supply piping and gas access hole may be caulked with high temperature caulk or stuffed with non-combustible, unfaced insulation to prevent cold air infiltration.

Ensure that gas line does not come in contact with outer wrap of appliance. Follow local codes.

Incoming gas line should be piped into the valve compartment and connected to the 1/2 inch connection on the manual shutoff valve.

Check all fittings and connections of appliance which may have loosened during shipping.

14

Heat & Glo • FB-IN-S, FB-GRAND-S783-910 Rev. D • 3/08

Page 14
Image 14
Heat & Glo LifeStyle FB-GRAND-S Gas Information, Fuel Conversions Gas Connection, Gas Pressures, Minimum inlet pressure

FB-GRAND-S, FB-IN-S specifications

The Heat & Glo LifeStyle FB-IN-S and FB-GRAND-S are modern and innovative gas fireplace models that encompass style, comfort, and efficiency. Designed to enhance living spaces, these fireplaces provide both warmth and ambiance, making them a popular choice among homeowners and interior designers alike.

One of the standout features of these fireplaces is their sleek and contemporary design. The FB-IN-S model boasts a minimalist aesthetic that can seamlessly blend with various decor styles, while the FB-GRAND-S offers a more grand presence with its larger viewing area and elegant lines. Both models are constructed with high-quality materials that ensure durability and longevity, providing peace of mind for users.

In terms of technology, both fireplaces are equipped with advanced heating systems that deliver efficient warmth quickly and effectively. The high-performance burner design maximizes heat output while minimizing fuel consumption, resulting in lower energy bills and a reduced carbon footprint. Additionally, these models come with the unique IntelliFire ignition system, which allows for reliable and easy operation. With just the push of a button, users can enjoy instant warmth without the hassle of traditional wood-burning fireplaces.

The LifeStyle series also features customizable flame settings, allowing users to adjust the intensity and height of the flames to create the perfect ambiance for any occasion. The unique flame presentation technology creates a realistic and captivating fire display, enhancing the overall aesthetic of the living space.

Safety is a top priority for Heat & Glo, and both FB-IN-S and FB-GRAND-S models incorporate several safety features. The advanced safety shut-off system ensures that the fireplace operates safely and reliably, while the cool-to-the-touch glass front protects against accidental burns. Additionally, the fireplaces come with options for remote control operation, providing convenience and ease of use.

Another notable characteristic of these models is the wide range of venting options available, allowing for flexible installation in various home layouts. Homeowners can choose from direct vent or top vent configurations, making it easier to integrate the fireplace into any existing space.

In conclusion, the Heat & Glo LifeStyle FB-IN-S and FB-GRAND-S offer a perfect blend of style, technology, and safety. With their modern designs, efficient heating capabilities, customizable flame settings, and advanced safety features, these fireplaces are poised to enhance any home, making them a worthwhile investment for those seeking comfort and elegance in their living spaces.