Heat & Glo LifeStyle PCFM-HNG, PCFML-HNG Maintaining and Servicing the Appliance, Check, Risk

9 Maintaining and Servicing the Appliance

Although the frequency of appliance servicing and main- tenance will depend on use and the type of installation, a qualified service technician should perform an appliance check-up annually.

WARNING

Risk of injury or property damage

Before servicing:

•Turn off utilities to appliance.

•Ensure appliance is completely cooled.

WARNING

Annual inspection by qualified technician recommended.

Check:

•Obstructions of combustion and ventilation air.

•Condition of logs.

•Condition of burner assembly.

•Burner ignition and operation.

•Burner air shutter adjustment.

•Gas connections and fittings.

Risk of:

•Fire

•Delayed ignition or explosion

•Exposure to combustion fumes

•Odors

Maintenance and Service Tasks:

Inspect		Maintenance Tasks
Burner Assembly	1	Remove logs and examine burner. Vacuum and wipe out dust, cobwebs, debris or pet hair. Use caution
		when cleaning these areas. Screw tips that have penetrated the sheet metal are sharp and should be
		avoided.
	2	Remove any foreign objects
	3	Inspect for paint condition, warpage, corrosion. Sand and repaint as necessary.
	4	Check the hose connecting the LP gas cylinder to ensure it is not damaged. Replace as necessary.
	5	Verify unobstructed air circulation.
Logs	1	Inspect for broken, damaged or missing logs. Replace as necessary.
	2	Verify correct log placement and no flame impingement causing sooting. Correct as necessary.
	3	Verify logs are clean and carbon (soot) free. Logs may be cleaned with a dry bristle brush or dry cloth.
		Handle logs with care as they are fragile and easily damaged.
Burner ignition and operation	1	Verify all gas connections are tight and leak-free.
	2	Clean off burner top, inspect for plugged ports, corrosion or deterioration. Replace burner if necessary.
	3	Check for smooth lighting and ignition carryover to all ports. Verify there is no ignition delay.
	4	Inspect for lifting or other flame problems.
	5	Verify air shutter is clear of dust and debris.
	6	Inspect orifice for soot, dirt or corrosion.
	7	Verify manifold and inlet pressures. Adjust regulator as required.
Regulator and Hose-LP Model	1	Clean regulator and hose with ?? and soapy water. Check for leaks, cracks, cuts or ??. Replace with
		4004-014 Regulator & Hose Kit if needed.

Heat & Glo LifeStyle Collection • Patio Campfire • Rev B • 08/08 15