Framing and Clearances, Fire Risk | Heat & Glo LifeStyle PCFM-HNG

3 Framing and Clearances

Note:

•Illustrations reﬂect typical installations and are FOR DESIGN PURPOSES ONLY.

•Illustrations/diagrams are not drawn to scale.

•Actual installation may vary due to individual design preference.

When selecting a location for your appliance it is important to consider the required clearances to walls (See Figure 3.1).

WARNING

Provide adequate clearance:

•Around air openings.

•For service access.

Locate appliance away from trafﬁc areas.

8 ft (2.4 m) to anything overhead

24 in. (610 mm) all around Patio Campfire

to walls & combustible materials

Heat & Glo LifeStyle Collection • Patio Campﬁre • Rev B • 08/08

Image 7

Contents

What to do if you smell gas PCFM-HNG PCFML-HNG Listing Label Information/Location Congratulations Table of Contents BTU Speciﬁcations High Altitude InstallationsListing and Code Approvals Appliance Certiﬁcation Any such action may cause a ﬁre hazard Design and Installation ConsiderationsGetting Started Tools and Supplies Needed Patio Campﬁre Components Inspect the Appliance and Components Fire Risk Framing and ClearancesSelect Appliance Location Clearances Gas Connection Gas InformationFuel Gas Pressure LP Gas Supply Finishing Natural Gas Models Appliance SetupBurner Assembly All Models Numbered Logs Log Assembly Natural Gas Operating InstructionsBefore Lighting Appliance LP Propane Lighting the Appliance For Your SAFETY, Read Before Lighting Fire Risk High Temperatures TroubleshootingFrequently Asked Questions Initial Break-in Procedure Check Maintenance and Service TasksMaintaining and Servicing the Appliance Risk of injury or property damage Before servicing This page intentionally left blank Reference Materials To obtain service under this warranty, you must Do Discardnot Contact Information