Rose electronic Vista Mini operation manual Installation, Connecting monitor, keyboard, and mouse

INSTALLATION

Step 1. Connecting monitor, keyboard, and mouse

1.1Plug the monitor, keyboard, mouse, and speaker cables directly into the rear panel of the unit.

Step 2. Connecting the computers

CPU cables connect your computers to Vista Mini. Each computer requires its own cables, with appropriate connectors for your particular CPU. CPU cables are available from Rose Electronics. Refer to page 3 for using the proper cable.

For Vista Mini models with DB 25 connectors:

2.1Plug the DB25 male connector of the CPU adapter cable into one of the numbered CPU ports on the Vista Mini side panel.

2.2Plug the CPU adapter cable’s monitor, keyboard, and mouse connec- tors into the CPU’s corresponding ports.

For Vista Mini models with PC connectors:

2.1Plug the HD15 male-male cable from the video card into one of the numbered HD15 female connectors on the Vista Mini rear panel.

2.2Plug the mini-din-6 male-male cable from the computer keyboard port into one of one of the numbered mini-din-6 female connectors with a keyboard symbol on the Vista Mini rear panel. If your computer has a din-5 keyboard port use the mini-din-6 female to din-5 male adapter.

2.3Plug the mini-din-6 male-male cable from the computer mouse port into one of one of the numbered mini-din-6 female connectors with a mouse symbol on the Vista Mini rear panel. If your computer has a se- rial port for the mouse use the mini-din-6 female to DB9 female adapter.

Warning do not substitute with a non-Rose adapter, there is a differ- ence, damage may occur if you use a third-party adapter!!!

2.4Plug the 3.5mm stereo cable into the stereo jack.

6 VIStA MINI INSTALLATION AND OPERATION MANUAL