Rose electronic Getting Started, Package contents, Vista Mini models, Locating the unit

GETTING STARTED

To acquaint you with your Vista Mini unit, this manual first describes Vista Mini’s front and rear panels. Then follow the installation on page 6, which is simply a description of how to plug in the connectors.

Package contents

Your Vista Mini package includes the Vista Mini unit, your warranty registration card, and this manual.

Vista Mini models

This manual describes two different models of Vista Mini, see Table 1 below. The features and commands are the same, the only difference is the connector type for the computers. Please disregard the diagrams and text that do not ap- ply to your model. The models available are:

Table 1. Vista Mini models

Model	Computers	Computer connector
KVT-2U	2 PCs	DB25 female
KVT-2PC	2 PCs	PC (HD15F, MD6F, MD6F, 3.5mm)

Locating the unit

The Vista Mini unit is best located as close to the CPUs as possible. This will re- duce the length of the CPU cables and provide a more cost-effective and neater installation. While usage of the Vista Mini is trouble-free and transparent and need not be in an accessible location, you may wish to access the front panel to observe the LEDs, switch to a computer, or reset the unit.

Cable requirements

Vista Mini connects to each computer with various cables, depending on which model and computer type, see the next page for the different cable types. You plug the keyboard, monitor, mouse, and speakers directly into Vista Mini. The cables are most commonly purchased with Vista Mini and will provide quick and trouble-free operation.

2 VIStA MINI INSTALLATION AND OPERATION MANUAL