Rose electronic Vista Mini operation manual Keyboard Command Summary, Key Sequence, Description

KEYBOARD COMMAND SUMMARY

To enter any keyboard command, first press and release the left Control Key, represented by <Ctrl>. Then enter the command followed by any parameters you wish to specify, for example the computer number.

Letter commands are not case sensitive, and are shown in upper case for clarity only.

Do not use the numeric keypad to enter any commands.

All Vista Mini commands use a two second time-out between characters, to abort the command. This is a feature that restores the keyboard to normal oper- ation, so the keyboard is not put it into a command mode which might lock it up from normal operation.

The <Ctrl> character is always passed through to the CPU. The command characters and command operands, however, are absorbed by the Vista Mini and not sent to the CPU.

Table 6. Keyboard command summary

Command	Key Sequence	Description
Connect to	<Ctrl> x	Connects your common keyboard, monitor,
computer	where x is 1, or 2	and mouse to the selected computer.
Connect to	<Ctrl> +	Selects the other computer.
next com-
puter
Connect to	<Ctrl> -	Selects the other computer
previous
computer
Scan On	<Ctrl> S	Turns Scan mode on, causing Vista Mini to
		start scanning sequentially from the current
		port through the remaining ports and begin-
		ning again at Port 1.
Scan Off	<Ctrl> X	Turns Scan mode off.
		Note: Scan can also be stopped by entering
		a port selection command.

14 VIStA MINI INSTALLATION AND OPERATION MANUAL