Rose electronic Vista Mini operation manual VIStA MINI INSTALLATION AND OPERATION MANUAL, Enter

Reset com-	<Ctrl> R	Resets and enables mouse and keyboard,
mand		enables PS/2 mouse on currently selected
		port.
Send null to	<Ctrl> N	Used to re-synchronize PS/2 mouse which
mouse		has gotten out-of-sync.
Reset com-	<Ctrl> O (alpha not	Used to reset computer’s mouse
puter mouse	zero)
Identify ROM	<Ctrl> I	Identifies ROM version, CPU must be at
version		some sort of command prompt to receive
		value.
Keep settings	<Ctrl> K	Tells Vista Mini to save current scan state
		and custom settings of commands shown
		below.
Scan time in-	<Ctrl> T xx <Enter>	Sets the time, in seconds, that Vista Mini will
terval	where xx is time in sec-	pause at each port when scanning.
	onds from	Note: Follow with Keep command.
	1-15 seconds
Set keyboard	Select port, then enter	Sets Vista Mini CPU’s keyboard mode. Used
mode	command:	when CPU is booted before being con-
	<Ctrl> M x <Enter>	nected to Vista Mini.
		Note: Follow with Keep command.
	where x is 1, 2, or 3
Set typematic	<Ctrl> A xxx <Enter>	Sets power-on keyboard typematic action
value	where xxx is a	which is controlled by the Vista Mini. This can
	1–3 digit number’ from 0	be used to adjust the key stroke rate and de-
		lay to the user preferred setting. See Tables 4
	to 127 indicating KB
		and 5 for how the typematic value is deter-
	typematic value
		mined.
		Note: Follow with Keep command.
Set mouse	Select port, then enter	Enable/disable PS/2 to serial mouse trans-
type	command <Ctrl> Q x	lation. Must be done for each computer
	<Enter>	where translation is desired by switching to
	where x is a 0 for a regu-	it and issuing the command.
	lar PS/2 mouse, 1 for a	Also enables/disables wheel mouse com-
	serial mouse, and 2 for a	munication. Issue the command for each
	PS/2 wheel mouse.	computer which has a wheel mouse.
		Requires a PS/2 mouse.
		Note: Follow with Keep command.

VIStA MINI INSTALLATION AND OPERATION MANUAL 15