Disassembly Instructions
10. POWER CORD
1.Remove the control box. (Refer to section 3)
2.Unfold the control box. (Refer to section 9)
3.Disconnect the grounding screw from the control box.
4.Disconnect 2 receptacles.
5.Remove a screw which fastens the clip cord.
6.Pull the power cord. (See Fig. 36)
7.
removal procedure, above.
(Use only one 
for ground connection.)
8.If the supply cord of this appliance is damaged, it must be replaced by the special cord.
(The special cord means the cord which has the same specification marked on the supply cord fit- ted to the unit.)
Cool |
|
|
Energy |
|
|
Saver |
|
|
Fan |
| F1 |
|
| F2LOW |
|
| F3 MED |
| Timer | HIGH |
MODE | 'F | |
TIMER | TEMP | |
| FAN | |
|
| |
|
| SPEED |
|
| POWER |
FIG. 36
11. THERMOSTAT
1.Remove the control box. (Refer to section 3)
2.Unfold the control box. (Refer to section 9)
3.Disconnect the theristor terminals from main P.W.B assembly.
4.Remove the thermostat. (See Fig. 37)
5.
Cool |
|
|
Energy |
|
|
Saver |
|
|
Fan |
| F1 |
|
| F2LOW |
|
| F3 MED |
| Timer | HIGH |
| 'F | |
|
| TEMP |
|
| FAN |
|
| SPEED |
|
| POWER |
FIG. 37
20Room Air Conditioner
