Heat Controller MGD60-E5A Connect Power Supply, MGD Series Gas Furnace, Installation Instructions

MGD Series Gas Furnace Installation Instructions

CONNECT POWER SUPPLY

1.Remove the furnace control panel cover.

2.Insert 115 V wiring through a strain relief bushing on the left side of the furnace.

3.Connect the HOT wire to the black pigtail lead; connect the NEUTRAL wire to the WHITE pigtail lead. Secure the connections with suitable wire nuts and wrap with electrical tape. Refer to Wiring Diagram on Pg. 11 for connections.

4.Connect the GROUND wire to a grounding screw in the control panel.

5.Reinstall and secure the control panel cover with screws.

Heat Controller, Inc. Jackson, MI 49203 MGD Installation Instructions 9