Heat Controller SMA/SMH 09 Sma/Smh, Heat Controller, Inc, Condensation, Auto-restart function

SMA/SMH OWNER’S MANUAL Heat Controller, Inc.

7.Condensation

•Dripping water may generate on the surface of the indoor unit when cooling in relatively high humidity. Adjust the vertical louver to the maximum air outlet position and select HIGH fan speed. NOTE: Water could drop onto the floor or objects below the indoor unit.

8.Heating mode (heat pump models only)

•The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heat- ing operation. When the outdoor temperature falls, heat drawn in by the air conditioner decreases accordingly. At the same time, the heat load of the air conditioner increases due to larger difference between indoor and outdoor temperature. If a comfortable temperature can’t be achieved by the air conditioner, we suggest you use a supplementary heating device.

9.Auto-restart function

•Power failure during operation will stop the unit completely.

•For units with the Auto-restart feature, when the power restores, the unit restarts automatically using the previous settings preserved by the memory function of the unit. Timer settings may need to be adjusted after a power failure.

10.Electrical interference

•Electronic equipment which uses wireless radio transmitters within 3 ft (1m) of the air conditioning unit may cause the unit to malfunction. Disconnect the unit with power and then re-connect the unit with power again. Push the ON/OFF button on the remote controller to restart operation. Ensure that the air conditioner unit is as far away from any electronic interference sources as possible, otherwise wireless interference can occur.

9