Heat Controller VMH30SB-1 specifications AutoRestartFunction, Operating Instructions

Operating Instructions

Vertical/HorizontalAirflowDirectionControl(Optional)

The up/down airflow (Vertical airflow) can be adjusted by using the remote controller.

1.Press the START/STOP BUTTON to start the unit.

2.Press CHAOS SWING BUTTON.

3. The louvers will swing up & down automatically.

4. To stop the louver at a desired

angle, press again

The left/right(Horizontal airflow) can be adjusted by using the remote control.

1.Press the START/STOP BUTTON to start the unit.

2.Press the HORIZONTAL AIRFLOW

DIRECTION BUTTON.

3. The louvers will swing left & right automatically.

4. To stop the louvers at a desired

angle, press again.

NOTE

•By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if enjoying natural breeze.

•Always use the remote controller to adjust the up and down air flow direction. Manually moving the vertical air flow direction louver by hand could damage the mechanism.When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

AutoRestartFunction

This function is useful in the situation of power failure.

When power regains after a failure this feature restores the previous operating condition and the air conditioner will run with the same settings.

NOTE

This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4 times.

To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator lamp(1) will blink 4 times.

ON/OFF

button

Owner's Manual 15