Operating Instructions
Operating Instructions
How
to
insert
the
Batteries
1. Remove the battery cover by pulling it according to the arrow direction.
2. Insert new batteries making sure that the (+) and
3. Reattach the cover by sliding it back into position.
NOTE
1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the batteries to save their working life.
3. If the display screen of remote controller starts, fading replace both of the batteries.
Wireless
Remote
Controller
Maintenance
1. Choose a suitable place where its safe & easy to reach.
2. Fix the holder to wall etc with the supplied screws firmly.
3. Slide the remote controller inside the holder.
NOTE
1.Remote controller should never be exposed to direct sunlight.
2.Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them.
3.In case some other appliances also get operated with remote control, change their position or consult your serviceman.
Operating
Method
1.The signal receiver is inside the unit.
2.Aim the remote controller towards the unit to operate it. There should not be any blockage in between.
