Heath Zenith 52-4075 manual Security Light with Motion-activatedSensor, Operation, Models, Test

Security Light with Motion-activated Sensor

This product is ENERGY STAR® compliant when used with 120 Watt bulbs.

Models 52-4075 / 52-4076

Installation and Operating

Instructions

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Photocell keeps the lighting off during daylight hours.

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Normal	1, 5, 10 min.		x
Manual	Until Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put the ON-TIME switch on the bottom	ON-TIME
of the sensor in the TEST position.
	10 5 1 TEST
AUTO
Put the ON-TIME switch in the 1, 5,		ON-TIME
or 10 minute position.
			10 5 1 TEST
MANUAL MODE

This package includes:

Lamp Holders Cover

Plate	4 Mounting
	Screws (2 sizes)

Sensor

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

	Gasket
Light Control	2 Wire
	Connectors

Requirements

•The Light Control requires 120-volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified elec- trician. Please check the codes in your area.

•This product is intended for use with a junction box marked for use in wet locations.

•The backplate has knockouts so the sensor can be mounted on most junction boxes.

•In some applications a universal adaptor plate may be needed. Adaptors are available at home centers and electrical supply stores.

			... back on.
	Mode Switching Summary
	TEST	Move ON-TIME Switch to
			1, 5, or 10 minutes
	AUTO		Flip light switch off
			for one second then
			back on*
MANUAL MODE

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the AUTO mode.

598-1284-00