Heath Zenith 5718 manual Operation, Model, DualBrite Motion Sensor Light Control, Features, Test

DualBrite® Motion

Sensor Light Control

Model 5718

Meets the ENERGY STAR® guidelines when DualBrite® function is off and ON-TIME is 1 or 5 minutes and when used with 120 W Max bulbs.

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Three lamp modes available: Normal, Soft, or Flash.

•DualBrite® Timer.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

This package includes:

Lamp
Holders	Rubber Plug
Cover	Plastic Hanger
Plate	Sensor
Light Control
	2 Wire
	Connectors
Mounting Bolt	Mounting Strap

	Gasket
2 Shells	6 Screws
	(3 sizes included)

Requirements

•The light control requires 120-volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Normal	1, 5, 20 min.		x
Manual	Until Dawn*		x
Accent	3, 6 Hr. to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch ON-TIME		DualBrite®
on the sensor bottom
to TEST and the Dual-
	TEST 1 5 20	Off 3 6 Dusk to
Brite® switch OFF.			Dawn

LAMP MODE

Put the LAMP MODE switch	LAMP MODE
in the Normal, Soft, or Flash	NORMAL SOFT FLASH
position.
AUTO
Put the ON-TIME switch in the		ON-TIME
1, 5, or 20 minute position.
		TEST 1 5 20

© 2007 HeathCo LLC 598-1308-02