© 2007 HeathCo LLC 598-1315-02
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
•
Three lamp modes available: Normal, Soft, or Flash.
• DualBrite® Timer.
• Photocell keeps the lighting off during daylight
hours.
• LED indicates motion was sensed (day or night).
Requirements
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some codes require installation by a qualified
electrician.
• This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
2 Wire
Connectors
Gasket
6 Mounting
Screws (3 sizes)
Mounting Bolt Mounting Strap
Rubber Plug

OPERATION

* resets to Auto Mode at dawn.
TEST
ON-TIME
TEST 1 5 20
AUTO
Note: When first turned on wait about 1 1/2 minutes for
the circuitry to calibrate.
Light Shield
Plastic Hanger
This package includes:
Put the ON-TIME switch in the 1, 5,
or 20 minute position.
Mode: On-Time: Works: Day Night
Test 5 Sec x x
Normal 1, 5, 20 min. x
Manual Until Dawn* x
Accent 3, 6 Hr. to Dawn x
LAMP MODE
NORMAL SOFT FLASH
LAMP MODE
Put the LAMP MODE switch
in the Normal, Soft, or Flash
position.
TEST 1 5 20
ON-TIME
Off 3 6 Dusk to
Dawn
DualBrite®
Put ON-TIME switch
on the sensor bottom
to TEST and the Dual-
Brite® switch OFF.
Light Control
Sensor
Cover Plate
2 Halogen Bulbs
(Installed)

Model 5797

DualBrite® Motion
Sensor Light Control
Meets the ENERGY STAR® guidelines
when DualBrite® function is off and
ON-TIME is 1 or 5 minutes.