Heath Zenith 595-5684-09 manual Tune Settings, 12345678, Inside Push Button Back of Chime

Tune Settings

WARNING: Disconnect chime unit from power source before opening code access door. Close door and replace screw before reconnecting to power.

Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong(two note), or Westminster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune (or Westminster, when available). This tune can be changed by following the instructions below.

•Ding (one note tune)

Inside Push Button: Add a jumper to location 8.

•Ding-Dong(two note tune)

Inside Push Button: Remove jumper from location 8.

Chime: Remove jumper from location 8.

•Westminster (Eight note tune) (Available on selected chimes)

Inside Push Button: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities.We recommend the back door use the Ding tune and the front door use the Ding-Dongtune (or Westminster tune, available on selected chimes). Models that include two push buttons will come factory set for front and back doors. Decals on the rear of the push button will indicate its setting.

Remove screw to open access door

12345678

Tune Setting

(Not used on all

models)

1 2 3 4 5 6 7	Tune Setting
8
Inside Push
Button

Back of Chime

595-5684-09

Note: Some models might require the use of tweezers to remove and replace the jumpers.

Figure 4

-3-