Motorola ME4067 Series manual Handset Settings

Call Timer

The duration of each call is displayed. You can switch this function on and off.

1.Press the key as often as necessary until the HANDSET menu appears.

2.Press the key .

3.Press the or key to select the CALL TIMER submenu.

4.Press the key .

5.Use the or key to switch the call timer on or off.

6.Press the key to confirm the setting.

Restore Default Settings

The handsets can be reset to the default settings. In doing so, all the settings which you have changed are returned to their DEFAULT values. The phone book entries will not be affected.

1.	Press the	key until the HANDSET menu appears.
2.	Press the		key .
3.	Press the	or	key to select the DEFAULT submenu.
4.	Press the		key .
5.	Press the		key to confirm the setting.

Note: The handset is reset to its DEFAULT settings.

Default Settings

	External Ringer Melody = Melody 1
	Internal Ringer Melody = Melody 2
	VIP Ringer Melody = selectable when you store a new number
	Ringer Volume Level 3
	Receiver Volume Level 3
	External Call Ring On/Off ON
Settings	Internal Call Ring On/Off ON
	Registering Additional Handsets
	Further handsets can be registered on the base station. They must support the GAP
Handset	standard. Please note, it is possible that some of the handset functions will not
	2.	Press the		key .
	be available.
	1.	On the handset you wish to register, press the key as often as necessary until
		the HANDSET menu appears.
	3.	Press the	or	key to select the REGISTER submenu.
	4.	Press the		key .
	5.	Press and hold the		key on the base station for 2-3 seconds, then enter the PIN
		when requested. (Default setting = 0000)
	6.	Press the		key .
32	Note: After the connection has been established, the name and number of the handset
	(the next available number if less than 4 are already registered ) appear in the display

Handset Settings

31