Using the Telephone
Make a handsfree call
In standby mode
1.Dial the telephone number and press the 
key.The handset speaker comes on. Or
2.Press the 
key and wait until the handset speaker comes on then dial the telephone number as required.
3.Press the 
key to end the call.
S w itching during a Call
1.Press the 
key to switch
2.Press the 
key to end the call.
Taking Calls
When an external call is received, all the handsets registered and the base station ring.
Handset is in the base station
1.Lift the handset from the base station; a connection is automatically established
(when the AUTO ANS function is active). Otherwise, press the 
key.
2.Carry out the conversation.
3.Press the 
key to end the call.
Handset is not in the base station
1.Press the 
key. Or the 
key to answer the call.
2.Press the 
key to end the call.
Prefix Dialling
When prefix dialling number has been entered, (see Handset Settings page 29) the prefix number that you set will be dialled out first whenever you make an external call. The prefix can be a number up to 5 digits. You can use the prefix memory to store an area code that you frequently use, for example 0207 or 08457, to save you dialling it each time you make a call.
1.Press the 0 key for two seconds.
2.Supplement the call number and press the 
key to establish a connection.
Dialing from the Phone Book
Note. To store a number in the Phonebook, see 'Store entries' page 25.
1. Press the 
key; the first entry in the phone book appears.
2. Press the | or | key to select the required subscriber from the phone book. |
Alternatively, enter the first letter of the name required.
3. Press the 
key . The number is dialed. Carry out the conversation.
Using the Telephone
19
20
