Motorola ME4067 Series manual Operation, Recording Announcement A1 Announce Only set to OFF

A1:	"Please leave your message after the beep."
A2:	"I am sorry that I am not available. Please call back later."

Recording Announcement A1 (Announce Only set to OFF)

1. Press until you hear 'A nno u nc em ent O ne'

2.Press . You will hear 'Now Recording' followed by a beep. Speak toward the Base Unit. You have up to 6 0 seconds for your announcement. Your announcement must be at least 3 seconds in length.

3.Press when finished. Your recording will be played automatically. If you're not satisfied, record your announcement again.

Answering Machine Operation

39

Recording Announcement A2 (Announce Only set to ON)

Follow the same steps as recording Announcement A1. However, this time you will hear 'A nno u nc em ent Tw o' since you have set Announce Only to O N .

Operation	Set remote access code
	Your Remote Access code allows you to retrieve messages, and record memos and
	announcements when you're away from your Answering Machine.
	The remote access code helps prevent unauthorised people from ringing up your
	answering machine and listening to your messages. The code can be any 4-digit number,
	from 0 0 0 0 to 9 9 9 9 . The pre-set code is 0000.
	1. Press	until you hear "Remote access code is 0000" and the display shows Ac.
	2. Press or	to set the first digit between 0-9. Press	to confirm.
	3. Repeat Step 2 until all 4 digits have been set. The machine announces the new code.

Machine	Remote Operation
	1.	Call your answering machine from any touch-tone phone.
	2.	When you hear your outgoing announcement, enter your 4-digit Remote Access code. .
	3.	You can now perform the following functions:

Answering	IF YOU WANT TO	PRESS
	Play messages in mailbox	1
	Repeat / Play Previous Message	4 / Press 4 Twice
	Stop playback or recording	5
	Play Next Message	6
	Delete current message	7
	Record a Memo	8, then 5 to stop
40	Record Announcement	9, then 5 to Stop
	Turn System On /Off	0
	Play Help Menu	*