Motorola ME4067 Series manual Base Station Settings, Barring Calls, Emergency Number

Base Station Settings

34

Barring Calls

You can select from various call barring options:
Option		Meaning
DISABLE		All telephone calls are possible.
EXTERNAL		All external calls are barred.			Settings
3.	Press the	or	as often as necessary to select the BARRING submenu.
NUMBER		Define a number which should be barred, e.g. 0190.
1.	Press the	key as often as necessary until the BASE menu appears.
2.	Press the		key.
4.	Press the		key.		Station
8.	Press the		key.
5.	Enter the 4-digit PIN code (pre-set code 0000).
6.	Press the		key.
7.	Use the	or	key to select the handset which should be barred.
	Use the	or	key to select Disable or External.		Base
	or
10. Use the		or	key to select NUMBER, press	key, then input the
	number you want to barring call. Maximum first 5 digits only.
11. Press the			key.

Emergency Number

You can store 2 emergency call numbers which can be dialled out at any time even

when call restrictions are set (for example, if the keypad is locked or call barring is 33 set). Each emergency number can have a maximum of 5 digits.

Example: If you set 123 as an emergency number - any numbers beginning with 123 are dialled out even with call restrictions

1.	Press the	key as often as necessary until the BASE menu appears.
2.	Press the		key.
3.	Press the	or	as often as necessary to select the EMERGENCY submenu.
4.	Press the		key.
5.	Enter the 4-digit PIN code (pre-set code 0000).
6.	Press the		key.
7.	Use the or	key to select the emergency number to be changed and change it.
8.	Press the		key to confirm the setting.

Note: It is recommended that you store any emergency number in the phone book with an appropriate name, e.g. Doctor.

Changing the Flash Time

If your phone is connected to a PBX/switchboard, you can change the recall (flash) time according to your Switchboard/PBX requirements.

1.	Press the	key as often as necessary until the BASE menu appears.
2.	Press the		key.
3.	Press the	or	as often as necessary to select the FLASH TIME submenu.
4.	Press the		key.
5.	Press the	or	key to select the required flash time.
6.	Press the		key to confirm the setting.

Note: Ask your switchboard/PBX provider for advice.