Wireless Mechanical
Battery Operated
Chime
This package includes (Style of push button and chime may vary from illustration):
•Wireless chime
•Wireless push button w/battery
•Hardware pack
This chime requires 4 “C” alkaline batteries (not included). In typical use,
alkaline batteries will last up to 2 1/2 years.
Figure 1
Figure 2
ON |
1 2 3 4 5 6 7 |
WARNING:To prevent possible SERIOUS INJURY or DEATH:
•NEVER allow small children near batteries.
•If battery is swallowed, immediately notify doctor.
1.Install alkaline type A23 12 volt push button battery (included). Remove back of case by pushing in tab on bottom with a small screw- driver. See diagram inside push button for correct battery orientation.
2.Remove chime cover. Pull firmly as shown in Figure 2.
3.Install 4 alkaline “C” batteries in chime. Make sure batteries are oriented properly as shown in Figure 3.
4.Test range. Temporarily position chime and push button where you want them mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.
Figure 3
© 2007 HeathCo LLC |
