5. Mount push button. Use either screws or double sided tape to mount push button.

To mount with screws, remove back of case by push- ing in tab on bottom with a small screwdriver (see Figure 1).

Attach back of case to door jamb or wall (see Figure 4). Snap front of push button on.

 

When attaching push button using double sided tape,

 

make sure the surface of the door jamb or wall is

 

clean.

 

6. Mount chime. There are three different ways to

 

mount the chime depending upon the model of chime

Figure 4

purchased. Determine which model you purchased

below. Mount the chime according to the instructions

 

 

for your chime.

Basic

Chime with Separate

Chime with Attached

Chime

Decorative Cover

Decorative Cover

Style of push button and chime may vary from illustration.

- -

598-1109-05

Page 2
Image 2
Heath Zenith 598-1109-05 manual Make sure the surface of the door jamb or wall is