Remote Controlled Products

FEATURES

•Quickly add ON/OFF control of a receptacle without the expense of new wiring.

•Four selectable channels allowing the use of up to four separate systems in the same home.

•Products are UL/cUL and/or FCC/IC tested and approved.

•Operational range of up to 50 feet.

This manual applies to the following products:

F

OF

ON

2-Button Remote Control

Indoor/Outdoor Receiver

Indoor Plug-In Receiver

2-BUTTON REMOTE CONTROL

OFF

ON

Operation

1.The two buttons on the remote will operate one or more receiver units with matching channels.

Note: Receivers must be at least 10 feet apart for best performance.

2.Push the ON button to turn the plugged in receiver on or the OFF button to turn the plugged in re- ceiver off.

3.Gently insert a small flat-head screwdriver between the two halves on the bottom of the remote and twist. Carefully separate the back of the remote from the front.

4.Lift the back of the remote up and lay aside.

5.Remove battery. Install replacement bat- tery. Make sure battery is oriented properly (see illustration).

6.Reassemble remote in reverse order.

Battery Replacement

The remote control requires a type A23 12 Volt alkaline battery to operate. The remote control is shipped with the battery installed. With typical use, the battery will last approximately one year. Remove battery when remote will not be used for an extended period of time.

To replace the battery, follow the instructions below:

1.Place remote control face down on a flat surface.

2.Remove screw on bottom of remote with a small phillips-head screwdriver.

Philips-Head

Remote

Screw

Control Back

Flat-Head

Screwdriver

Removing Back of Remote Control

 

 

 

 

 

Battery

ON

Compartment

 

 

 

 

 

1 2

 

(Type A23)

 

 

12 V

Inside of Remote Control

© 2003 DESA Specialty Products™

598-1119-05

Page 1 Page 2
Page 1
Image 1
Heath Zenith 598-1119-05 manual Features, Button Remote Control, Operation, Battery Replacement
Page 1 Page 2

598-1119-05 specifications

The Heath Zenith 598-1119-05 is a versatile and advanced outdoor motion sensor light that combines form and function to provide enhanced security and convenience for residential and commercial properties. This sophisticated lighting solution is designed to illuminate areas while ensuring safety and energy efficiency, making it an ideal choice for home and business owners alike.

One of the main features of the Heath Zenith 598-1119-05 is its powerful motion detection capability. Equipped with a state-of-the-art passive infrared (PIR) sensor, this light detects movement from up to 30 feet away, ensuring that anyone approaching the area is illuminated promptly. The adjustable sensitivity and range settings allow users to customize the light's responsiveness to ensure it activates only when necessary.

The design of the Heath Zenith 598-1119-05 is not only functional but also aesthetically pleasing. It features a sleek and modern look that blends seamlessly with various architectural styles, making it a great fit for any outdoor space. The rugged weatherproof construction ensures that the light can withstand harsh environmental conditions, providing reliable performance all year round.

In terms of lighting technology, the Heath Zenith 598-1119-05 utilizes energy-efficient LED bulbs. These bulbs provide bright illumination while consuming significantly less energy than traditional incandescent bulbs. This efficiency not only reduces energy costs but also decreases the frequency of bulb replacements, making the light a low-maintenance solution for outdoor lighting.

Another notable characteristic of the Heath Zenith 598-1119-05 is its adjustable time and light sensitivity settings. Users can set how long the light stays on after motion is detected, ranging from a few seconds to several minutes. Additionally, the light's dusk-to-dawn feature allows it to automatically turn on at dusk and off at dawn, providing around-the-clock security without manual intervention.

Installation of the Heath Zenith 598-1119-05 is straightforward, thanks to its user-friendly design and comprehensive instructions. The light can be mounted on walls or ceilings, making it incredibly versatile for a range of outdoor applications.

Overall, the Heath Zenith 598-1119-05 is an excellent choice for anyone seeking an efficient and effective outdoor motion sensor light. Its advanced features, durable construction, and stylish design make it a standout option for enhancing outdoor security and convenience.
Top Page Image Contents