Heath Zenith 598-1215-01 owner manual Chime Installation, Chime Dimensions

Models: 598-1215-01

1 32
Download 32 pages 18.44 Kb
Page 3
Image 3

Chime Installation

IMPORTANT: Proper installation requires a diode on the front door push button. See Diode Installation Instructions (page 5) after completing steps 1 through 10 below.

Note: Electrical work must be in accordance with national and local electrical codes. If in doubt, consult a qualified electrician.

1.Verify transformer power rating. Power must be supplied from a 16 Volt AC, 10 Watt or a 16 Volt AC, 15 Watt transformer (Heath®/Zenith models 122C, 121AC, or 125C).

2.Remove cover from existing chime.

3.Label all wires before disconnecting. Using masking tape, mark each wire according to existing chime terminal markings.

“F” – Front Push Button Wire

“T” – Transformer Wire

“R” – Rear Push Button Wire*

4.Disconnect all wires from existing chime.

5.Remove existing chime base from wall.

6.Determine chime mounting location. IMPORTANT:This chime requires more mounting surface than most other chimes. Use the dimensions in Figure 1 to help determine the proper loca- tion of the chime. If chime will not fit in the same location as the existing chime, then contact a licensed electrician to move the existing wiring to a more suitable location.

Wire Entrance Hole

Mounting

Hole (x2)

12 11/16"

51 3/8"

58 1/2"

Continued

Figure 1 - Chime Dimensions

Illustrations may vary from actual chime unit.

--

598-1215-01

Page 3
Image 3
Heath Zenith 598-1215-01 owner manual Chime Installation, Chime Dimensions

598-1215-01 specifications

The Heath Zenith 598-1215-01 is a versatile and innovative motion-activated outdoor security light designed to enhance both convenience and safety around your home. With its robust build and cutting-edge features, this lighting solution effectively combines functionality with energy efficiency.

One of the main features of the Heath Zenith 598-1215-01 is its advanced motion detection technology. It is equipped with a passive infrared sensor that can detect motion up to a certain distance, typically between 30 to 70 feet, depending on environmental conditions. This capability allows the light to automatically turn on when it detects movement in its range, providing increased security by illuminating areas when someone approaches.

The design of the Heath Zenith 598-1215-01 emphasizes durability as well, making it suitable for outdoor use. It typically features a weather-resistant exterior that protects it against rain, snow, and varying temperatures. Its bold black finish not only adds an aesthetic appeal but also complements various outdoor environments.

In terms of energy efficiency, this security light uses LED technology, which promotes longer operational life and reduced energy consumption compared to traditional incandescent bulbs. The integrated LEDs provide bright illumination at lower wattage, making it an eco-friendly choice for homeowners looking to reduce their electricity bills.

Customization is another key characteristic of the Heath Zenith 598-1215-01. Users can easily adjust the sensitivity, duration, and range of the motion sensor to better suit their specific needs. This flexibility allows for personalized security settings, ensuring that the light activates only when necessary, thus minimizing unnecessary power usage.

Moreover, this model is often designed with a sleek and modern appearance that seamlessly integrates into various outdoor styles. Whether installed near driveways, patios, or garden paths, it enhances visibility and safety in dark areas.

Overall, the Heath Zenith 598-1215-01 is a reliable and efficient outdoor lighting solution that combines effective motion detection, energy-saving LED technology, and durable construction to provide homeowners with peace of mind and convenience. Its versatility and performance make it an ideal choice for enhancing security around residential properties.