Heath Zenith and wiring the 6108 Wall Switch, TYPICAL 3-WAYINSTALLATION, SWITCH 1ST IN CIRCUIT

See pages 3 through 5 for detailed instructions for installing

and wiring the 6108 Wall Switch.

TYPICAL 3-WAY INSTALLATION

WHITE WHITE WHITE

FROM

POWER BLACK *COMMON*COMMON

SOURCE

RED

(In Wall)

BLACK BLACK

GREEN (Ground)

6108 SWITCH 1ST IN CIRCUIT

WHITE

FROM

POWER

SOURCE

BLACK BLACK

6108

GREEN (Ground)

WHITE	WHITE
	ADD JUMPER WIRE
	*COMMON
BROWN	RED
	(In Wall)
RED	BLACK	BLACK
(From 6108)	EXISTING
	3-WAY SWITCH

6108 SWITCH 2ND IN CIRCUIT

	WHITE		WHITE
FROM	ADD JUMPER WIRE
POWER
SOURCE		*COMMON
	BLACK	RED	BROWN
		(In Wall)
		BLACK	RED
		EXISTING	(From 6108)
GREEN		3-WAY SWITCH
(Ground)

WHITE

BLACK

6108

BLACK

*COMMON-Used for illustrative purposes only. CheckYour Switch. The common may be in a different location, depending on the brand of your switch.

RED is used to represent the second wire between two standard three-way switches. This may not be the color used in all installation. If you are not sure about your wiring, call an electrician for instal- lation help. There is also a RED wire on the 6108 switch. Check the instructions above closely and do not confuse the two.

598-1233-03