4.To change the code, either:
•Add a jumper to the same location on both the push button and the chime or...
•Remove a jumper from the same location on both the push button and the chime or...
•Move a jumper on the push button from one location to another. Move the corresponding jumper on the chime to match the new location in the push button.
Example: Move jumper at location “5” to location “4” on both the push button and the chime.
Note: Code positions 1 through 7 must be exactly the same for both the push button and chime for this system to function.
Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the push button and on the chime (see Figure 5).
The range of the wireless chime can vary with location, temperature, and battery condition.
| * Code Settings |
Remove screw to | Must Match Both Push |
open access door | Button and Chime |
1234567
Back of Chime
12345678 |
Inside Push |
Button |
Note: Some models might require the use of tweezers to remove and replace the jumpers.
Figure 5
