COMPLETE THE INSTALLATION
❒Stuff the wires into the junction box. Make sure the wires from the fixture go through the wire path, and no wires get pinched.
Slide the fixture onto the | Junction |
mounting screws and | Box |
tighten nuts. |
|
❒Caulk fixture mounting surface with silicone weather sealant. You may want to wait until you have completed the tests and adjustments on page 6.
❒Install light bulb. See fixture markings for proper bulb type and wattage.
❒If so equipped, install the fixture top.Secure with decorative screws.
❒If you will not be installing the optional tail assembly, install the decorative nut onto the bottom of the fixture now.
Optional Assembly
❒If so equipped, you may install the decora- tive tail as shown below.
| Hex nut | |
1. Screw in | 2. Add tail piece | |
extension bar. | ||
and trim. | ||
| ||
| 3. Install | |
Bottom trim piece | decorative nut. | |
has drain hole |
|
