❒Walk through the coverage area noting where you are when the lights turn on. Move the sensor head left or right to change the coverage area.
IMPORTANT: Grasp the sensor only as shown and turn the entire sensor. Any other method may damage the sensor. Do not force the sensor past the stop- ping points.
|
| ° | 1 |
| 0 | 5 | |
| 5 |
| |
|
| ° | |
1 |
|
| 0 |
|
|
|
❒If you need to change the sensitivity, temporarily remove the fixture and make the adjustment. Too much sensitivity may increase false triggering.
❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).
❒Set the amount of time after dusk you want the lights on accent level.
SPECIFICATIONS
Range | Up to 30 ft. (9.1 m) [varies with | ||
|
| surrounding temperature]. | |
Sensing Angle | Up to 150° | ||
Electrical Load | Up to 100 Watt Maximum | ||
|
|
| Incandescent. |
Sensor Capacity | Up to 360 Watt (3.0 A.) | ||
|
|
| Maximum |
Power Requirements | .......... 120 VAC, 60 Hz | ||
Operating Modes | TEST, AUTO, and | ||
|
|
| MANUAL MODE |
Time Delay |
| 1, 5, 10 minutes | |
DualBrite® timer | 3, 6 hrs, |
DESASpecialty Products reserves the right to discontinue products and to change specifica- tions at any time without incurring any obliga- tion to incorporate new features in products previously sold.
Rotating Sensor Head to Change
Coverage Area