TROUBLESHOOTING GUIDE
SYMPTOM |
| POSSIBLE CAUSE |
| |||
|
| |||||
|
| |||||
Lights will not come | 1. Light switch is turned off. | |||||
on. |
|
| 2. F l o o d l i g h t | i s | l o o s e o r | |
|
|
|
| burned out. |
|
|
|
|
| 3. | Fuse is blown or circuit breaker | ||
|
|
|
| is turned off. |
|
|
|
|
| 4. | Daylight | ||
|
|
|
| check after dark). |
| |
|
|
| 5. | Incorrect circuit wiring, if this is a | ||
|
|
|
| new installation. |
| |
|
|
| 6. | |||
|
|
|
| sired area. |
|
|
Lights | come | on | 1. Light control may be installed in | |||
in daylight. |
|
| a relatively dark location. | |||
|
|
| 2. | Light control is in Test . | ||
|
|
|
| (Set control switch to an | ||
|
|
|
|
| ||
Lights | come | on | 1. Light control | may | be sensing | |
for no | apparent |
| small animals or automobile traf- | |||
reason. |
|
|
| fic |
| |
|
|
| 2. | Range is set too high . | ||
|
|
|
| (Reduce Range). |
| |
|
|
|
|
|
|
|
SYMPTOM | POSSIBLE CAUSE |
|
|
|
|
Lights stay on | 1. A flood lamp is positioned too close to |
continuously. | the sensor or pointed at nearby objects |
| that cause heat to trigger the sensor. |
| (Reposition the lamp away from the |
| sensor or nearby objects). |
| 2. Light control is pointed toward a heat |
| source like an air vent, dryer vent, or |
| |
| face. (Reposition sensor). |
| 3. Light control is in Manual Mode.(Switch |
| to Auto.) |
Lights flash on | 1. Heat or light from the lamps may be |
and off. | turning the light control on and off. |
| (Reposition the lamps away from the |
| sensor). |
| 2. Heat being reflected from other objects |
| may be affecting the sensor. (Reposi- |
| tion sensor). |
| 3. Light control is in the Test mode and |
| warming up.(Flashing is normal under |
| these conditions). |
| 4. Light may be leaking through the flood- |
| lamp reflectors. (Make sure the metal |
| lamp protectors are installed). |
|
|
Technical Service
Please call
before returning product to store.
If you experience a problem, follow this guide.You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at
HeathCo LLC
P.O. Box 90045, Bowling Green, KY
ATTN: Technical Service
*If contacting Technical Service, please have the following information available: Model Number, Date of Pur- chase, and Place of Purchase.
No Service Parts Available for this Product
TEN YEAR LIMITED WARRANTY
This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.
For a period of ten years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be cor- rected at no charge to you.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expend- able items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.
This warranty covers only HeathCo LLC assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PUR- POSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF HeathCo LLC FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please keep your dated sales receipt, it is required for all warranty requests.
5 |