Heath Zenith manual DualBrite Motion Sensor Light Control, Operation, Model SH-5597, On-Time

DualBrite® Motion

Sensor Light Control

Model SH-5597

Meets the ENERGY STAR® guidelines when DualBrite® function is off and ON-TIME is 1 or 5 minutes.

Features

•DualZone™ Technology.

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Bulb Saver™ - Extends bulb life by up to 4x standard bulbs. Lights bulb to full bright in under 2 seconds.

•DualBrite® Timer.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

Package Contents

Bulb Holders

Requirements

•The light control requires 120-volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 20 Min		x
Manual	To Dawn*		x
Accent	3, 6 Hr, to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch	ON-TIME	DualBrite®
on the sensor bottom
toTEST and the Dual-
	TEST 1 5 20	Off 3 6 Dusk to
Brite® switch OFF.
			Dawn
	AUTO
Put the ON-TIME switch in the 1, 5,			ON-TIME

or 20 minute position. TEST 1 5 20

MANUAL MODE

Gasket

Cover

PlateSensor

Light Control

	2 Wire
Mounting Bolt	Connectors
	Mounting Strap

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

Rubber Plug	2 Bulbs
6 Screws
(3 sizes included)	(installed)
Plastic Hanger

... back on.

© 2008 HeathCo LLC 598-1162-02