TEST AND ADJUSTMENT
❒Turn on the circuit breaker and light switch.NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on or when switching modes wait 1 1/2 minutes.
❒Turn the SENSITIVITY (SENS) control to the mid position and the
SENS |
❒Walk through the coverage area noting where you are when the lights turn on. Move the sensor head up, down, or sideways to change the coverage area.
❒Adjust the SENSITIVITY as needed. Too much sensitivity may increase false triggering.
❒Set the amount of TIME you want the lights to stay on after motion is detected (1, 5, or 10 minutes).
10 5 1 TEST |
|
|
|
|
|
|
| MIN MAX | ||||||
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bottom of Sensor
Avoid aiming the control at:•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•Nearby large,
110°
5 ft.
| 60 ft. |
Maximum Range | Maximum |
| Coverage Angle |
The detector is less sensitive to motion directly towards it and more sensitive to across motion.
Motion | Motion |
| Sensor |
Least Sensitive | Most Sensitive |
SPECIFICATIONS
Range . . . . . . . . . . . . Up to 60 feet (varies with surrounding
temperature).
Sensing Angle . . . . . . Up to 110°
Electrical Load . . . . . . 25 to 75 watt Incandescent Power Requirements
(Lamps off) . . . . . . . . 120 VAC, 60 Hz
Operating Modes . . . . TEST, AUTO and MANUAL OVER-
RIDE
Time Delay . . . . . . . . 1 , 5, 10 minutes Sensitivity . . . . . . . . . Adjustable
HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obliga- tion to incorporate new features in products previously sold.
3 |