FM Series
•Meter Demand
•Save up to 50% on Salt
• |
|
Valve Body | 1 |
Water Conditioning System
• Solid |
life. No need to worry about corrosive water damaging the |
valve. |
• A single motor drives the valve without the problems of |
springs, microswitches or solenoids. |
• Rugged 3/8” gears assure accurate alignment with no stripping. |
• Time controlled brine refill assures accurate salting with no float |
valve to malfunction. |
• Easy adjustable salt settings. |
• Full flow bypass valve is standard. |
• |
low as 0.15 gpm and as high as 15.0 gpm. |
• |
allows sediment in water to pass through without damaging the |
unit. |
2
Brine Tank
Specifications
Water Softener
How Does A Water Softener Work?
1.Hard water enters your water softener (1) and passes down through the ion exchange resin, which are charged with sodium ions. The hard water ions (calcium and magnesium) are attract- ed to the ion exchange resin and an equal amount of sodium ions are bumped off into the water supply. When the water reaches the bottom of the tank, it is softened and ready to be used in your home and business.
2.When the ion exchange resin is saturated with calcium and magnesium (hard water ions) it must be recharged. (2) A strong brine solution enters the tank and flushes the calcium and mag- nesium ions off the ion exchange resin and attaches itself.
3.A final rinse process ensures that any unused brine is rinsed from the system and your (1) water softener is now fully re- charged and ready to provide you with soft water.
|
|
|
|
| SERVICE | FLOW | BACK |
| BRINE TANK |
| |
DEMAND |
|
| CAPACITY |
| FLOW | RATE | WASH | MINERAL | TANK | SALT | FLOOR |
MODEL | MINERAL | LOW SALT | MED. SALT | HIGH SALT | RATING | @ | RATE | TANK | SIZE | STORAGE | SPACE |
NAME | CU. FT. | GRAINS/LBS. | GRAINS/LBS. | GRAINS.LBS. | GPM/PSI | 15 PSI | GPM | (INCHES) | (INCHES) | (POUNDS) | (WxHxD) |
0.50 | 9,800/3.0 | 14,100/5.0 | 16,600/7.5 | 6.1/6.8 | 11 | 1.2 | 7 x 44 | 18 x 33 | 300 | 26x52x19 | |
0.75 | 14,700/4.5 | 21,200/7.5 | 24,900/11.3 | 8.4/9.7 | 11.5 | 1.5 | 8 x 44 | 18 x 33 | 300 | 27x52x19 | |
1.00 | 19,600/6.0 | 28,200/10.0 | 33,200/15.0 | 10.0/10.7 | 12 | 2.0 | 9 x 48 | 18 x 33 | 300 | 28x56x19 | |
1.50 | 29,400/9.0 | 42,300/15.0 | 49,800/22.5 | 9.7/10.3 | 12.5 | 2.4 | 10 x 54 | 18 x 40 | 300 | 29x62x19 | |
2.00 | 39,200/12.0 | 56,400/20.0 | 66,400/30.0 | 12.0/11.6 | 13.5 | 3.0 | 13 x 54 | 18 x 40 | 375 | 32x62x19 | |
3.00 | 58,800/18.0 | 84,600/30.0 | 99,600/45.0 | 12.0/10.6 | 15 | 5.0 | 14 x 65 | 18 x 40 | 375 | 39x73x25 | |
FCM
1.These conditioners are designed for hardness removal.
2.Limit of 2 ppm of Ferrous Iron. Add 3 grains per gallon for each ppm of Iron present when sizing.
3.These conditioners will not purify or make your water safe to drink.
4.Water pressure must be between 25 psi and 120 psi.
5.Water temp. must not exceed 110 F & the unit cannot be subject to freezing conditions.
6.See Owner’s Manual for specific operating details.
7.Product improvements and design changes subject to change without notice.
HELLENBRAND WARRANTY
Hellenbrand warranties every FM Series in ac- cordance with the
Hellenbrand, Inc.
404 Moravian Valley Road 
Waunakee, WI 53597
www.hellenbrand.com
Dealer Information:
