Henkel manual Henkel, Inc, Models K-900& K-1000Holding Ovens, One Year Limited Warranty

Models: K-1000 K-900

1 10
Download 10 pages 1004 b
Page 2
Image 2
Henkel, Inc.

Henkel, Inc.

P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171

www.keenovens.com

Models K-900 & K-1000 Holding Ovens

Installation Instructions & Repair Parts List

One Year Limited Warranty

Henkel, Inc. warrants its products against defects in material and workmanship. Henkel, Inc. will either repair or replace without charge any properly installed product which fails under normal operating conditions within one year from date of installation, provided it is returned to our factory, transportation prepaid, and our inspection determined it to be defective under the terms of this warranty. The warranty covers only equipment manufactured by Henkel, Inc., and does not extend to transportation, installation, or replacement charges at the buyers’ facility; nor does it apply to any other equipment of another manufacturer used in conjunctions with Henkel, Inc. equipment. No other warranty, expressed or implies exists beyond that included in this statement.

Recommended Spare Parts

When it is critical to have continuous operation of this unit;

we suggest having the following spare parts on hand:

Heating Element Assembly

Power Cord

Thermostat Assembly & Thermometer Kit

General Information

The model K-900 is a 1000 lb. capacity holding oven. The K-1000 is a 1500 lbs. capacity holding oven. Both of these ovens are designed to hold 18” electrodes at moderate optimum temperatures to assure dryness. Construction is of steel which has been treated and then painted with a chemical-resistant blue finish. All Keen ovens are Mercury free.

Page 2
Image 2
Henkel manual Henkel, Inc, Models K-900& K-1000Holding Ovens, Installation Instructions & Repair Parts List