ELECTRICAL CONNECTIONS
WARNING! Before working on wiring for any electrical appliance, be sure the electrical power has been turned off at the breaker/fuse box.
WARNING! Disconnect electrical power supply and place a tag at the disconnect switch indicating that you are working on the circuit.
WARNING! Electrical and grounding connections must comply with the applicable portions of the national electrical code and/or other local electrical codes.
WARNING!
Do not use an extension cord for this appliance.
The dishwasher comes with an electrical cord for
If the cord is not long enough, or if a hard- wire installation is needed, follow instructions on page 8.
NOTE: Access holes should be
GROUNDING INSTRUCTIONS
This unit must be grounded to operate properly. It must be connected to a grounded metal, permanent wiring system, or an
Damage to the dishwasher could occur if it is not properly grounded.
WARNING! Make sure the water supply line, drain line and branch circuit wiring do not touch any exposed terminals of dishwasher wiring.
PREPARING THE DISHWASHER FOR INSTALLATION
At this point the styrofoam, plastic wrap, and the wood pallet (base) should be removed from the dishwasher. Now is an excellent time to inspect for any shipping damage. Should you find any damage, you should report it to your dealer or builder immediately.
Be sure to remove the toe kick and toe kick insulation which are on top of the dishwasher.
SLIDES FOR LEGS
The unit comes with white plastic slides for the legs to protect the kitchen floor from being damaged when you slide the unit into place. The slides simply snap onto the bottom of the legs.
THE FILL STRIPS
All Asko Tall Tank dishwashers come with
(Not on all models)
Fill Strip
Protective slides for legs simply snap onto the bottom of the legs.
NOTE:
Fill Strip
If the cabinet opening is European measure- ment
Page 6
