MOVING THE MACHINE INTO PLACE
WARNING!
Make sure you put the protective slides on the legs to prevent damaging the floor when you slide the unit into place (see page 6).
1.Position the machine in front of the cabinet opening.
2.Make the height adjustment while the dishwasher is in front of the opening.
3.Pull out the drain hose to ensure there are no sharp bends.
4.Start to feed water and drain lines and electric cord (if necessary) into the access hole in the cabinet.
5.Gently slide the unit into the dishwasher opening. As you do this, feed the drain line and inlet hose into the access hole in the side of the cabinet.
As you slide the unit into place, feed the drain line and inlet hose into the access hole in the side of the cabinet.
WARNING! Be careful of sharp edges.
Page 7
