Model 291
Problem
Cause
Correction
SHORTENING FOAMING/DRAINING SECTION
Foaming or boiling over of shortening
Shorteningwill
not drain from frypot
Shortening leaking through drain valve
• Water in shortening | • At end of a Cook Cycle, |
| drain shortening and clean |
| frypot; add fresh shortening |
• Condensation line stopped up | • Remove and clean condensation |
| line |
• Improper or bad | • Use recommended |
shortening | shortening |
• Improper filtering | • Refer to the procedure |
| covering filtering the shortening |
• Cold zone full of cracklings | • Filter shortening |
• Improper rinsing after | • Clean and neutralize the |
cleaning the fryer | frypot; rinse with vinegar |
| to remove the alkaline, then |
| rinse with hot water and |
| dry frypot |
|
|
• Drain valve clogged with | • Open valve - push cleaning |
crumbs | rod through drain opening from |
| inside of frypot |
• Obstruction in drain | • Remove obstruction |
• Faulty drain valve | • Replace drain valve |
904 |
